BRDM-2 ŽAMDARMERIJA SRBIJE
Pre nekoliko godina sastavio sam i ofarbao maketu BRDM-2 kao poklon za Niški odred Žandarmerije. U pitanju je sada već vremešna, rezinska maketa proizvođača Verlinden u razmeri 1/35.
Odlivak je besprekoran a budući da je telo vozila odliveno iz jednog komada punog rezina, lepljenjem točkova, kupole i nešto sitnih i ecovanih delova sastavljanje je završeno vrlo brzo.
___________________________________________________________________________________
A few years ago I made a kit of BRDM-2 as a gift for one battalion of Serbian gendamery.
I decided to use an aging but still very good Verlinden´s 1/35 resin BRDM-2 .
Assembly was straight forward and rapid regarding fact that body was casted as one resin block, adding a few resin and PE bits assembly was done.
Kao i obično Cosmos mat crni sprej korišćen je kao prajmer, brzo se suši a mat finiš služi kao odlična podloga za boju koja sledi..... naravno SMB aka Revell 362 za ljubitelje domaćeg oklopa omiljena Revell-ova boja za .
____________________________________________________________________________________
Fast drying, automotive primer was used from a spray-can, its mat finish is good base for finishing paints. Excellent match for so called SMB color used on most Yugoslav / Serbian Army AFVs is Revell 362 SM paint.
Gledajući fotografije trudio sam se da kopiram proces farbanja na pravom vozilu, takozvana "ameba" kamuflaža farbana je uz pomoć šablona, napravio sam maske od molerske trake. Nakon crne boje koristeći iste maske (kao i na pravom vozilu) naneo sam i braon mrlje .
____________________________________________________________________________________
According to photos so called "amoeba" cammo was painted using paper masks, imitating that I made masks form masking tape . Same paint masks was used for black and brown spots like it was used for real vehicle.
Završena maketa.... Done ....
No comments:
Post a Comment