How To - easy exausts

Auspuh / Exhaust



 


Evo jedne  brzinske tehnike farbanja auspuha na avionima .Obzirom da sam hteo izgled ne baš preterano zarđalih izduva na skoro pa novom avionu stara tehnika sa prve slike mešanjem boje i pigmenta je otpala...

------------------------------------------------------------------------------------------------------------------------------

Here is a quick technique for painting the exhaust on airplanes. Since I wanted the look of not too rusty exhausts on the almost new plane, the old technique from the first picture by mixing color and pigment fell off ...



Na postojeće stanje sam se nadovezao utrljavanjem čeličnog/ gun metal praha  uz pomoć ove "četkiice" sa gumenim vrhom, idealna je za ovakve zadatke. Povrsina bi trebalo da bude mat. Poliranje vatom ili pamučnom krpicom uglačava površinu i skida višak metalnog pigmenta.

------------------------------------------------------------------------------------------------------------------------------

I followed up on the existing condition by rubbing steel / gun metal powder with the help of this "brush" with a rubber tip, it is ideal for such tasks. The surface should be matte. Polishing with cotton wool or a cotton cloth polish the surface and removes excess metal pigment.






Sada sledi praktično najvažniji korak, za to je potrebna tuš boja . Tuš je odabran zbog njegove polu-transparentnosi i mogučnosti da se sa nekoliko slojeva postigne tamnija nijansa ali i dobije efekat " dubine ".

Koristio sam razređeni oker , braon ili tamno braon nijansu u jednom , 2 ili 3 sloja u zavisnosti od efekta koji vam je cilj. Potrebno je napraviti pauzu izmeću svakog sloja od bar 5 minuta. Ovo je klasična filter tehnika i verovatno je moguće postići zadovoljavajući efekat i sa razređenim akrilima umesto tuša .

------------------------------------------------------------------------------------------------------------------------------

Well now follows practically the most important step, for that you need ink paint. The inks were chosen because of their semi-transparency and the ability to achieve a darker shade with a few layers, but also get the effect of "depth".

I used diluted ocher, brown or dark brown shade in one, 2 or 3 layers depending on the effect you are aiming for. It is necessary to take a break between each layer of at least 5 minutes. This is a classic filter technique and it is probably possible to achieve a satisfactory effect even with diluted acrylics instead of ink.




Krajnji rezultat nakon što su zazori i otvori auspuha su dobili crni wash .

------------------------------------------------------------------------------------------------------------------------------

Final result after the gaps and exhaust vents received a layer of black wash.





No comments:

Post a Comment